Pool Blankets - Commercial Bubble
UltraDome™ technology is highly researched & tested design that completely eliminates weak points in a pool cover producing a tougher pool blanket – top & bottom – that lasts longer. Manufactured from commercial grade 525 micron PE (polyethylene) blue bubble material. This material has an R-value (thermal resistance) of 0.1 m2K/W & a weight of 460 g/m2.
Tough, flexible & easy to handle, they don’t absorb any water to make them heavier. Advanced manufacturing techniques use super toughened polyethylene containing maximum antioxidants, tougheners and UV inhibitors to resist salt, sun and chemicals. UltraDomeTM bubble covers are also translucent, allowing maximum transmission of warming solar radiation into the pool water while also efficiently insulating against heat escape. In an outdoor pool, they can warm the water by up to 8ºC
It comes complete with full edge binding and end reinforcing, cords, flotation rod, multi point attachment and an attached over cover to protect your investment when on the roller. A floating haul cord is supplied to enable ease of operation. If wind is a problem the blankets can be fitted with wind skirts at additional cost. Covered by a manufactures 5 year pro-rata warranty. Exact pool measurements, roller attachment points & any intrusions into the water will need to be supplied prior to manufacture.
Pool Blankets - Commercial Foam/Thermal
Made from 4.5mm thick, cross-linked PE closed cell polyethylene foam. This foam consists of 3 layers, & is flame-bonded each side to a UV-stabilised, waterproof, non-toxic & chemical resistant blue woven PE material called Canvacon. A great advantage of the double-sided blue material casing is that if your ThermoTech™ foam blanket is installed on a symmetrical pool – the cover can be inverted to significantly extend its lifespan. ThermoTech™ foam pool blankets have a R-value (thermal resistance) of 0.13 m2K/W & a weight of 585 g/m2.
The blankets come complete with full edge binding, end reinforcing, & haul cords are installed onto the blanket. Covered by a manufactures 5 year pro-rata warranty. If wind is a problem the blankets can be fitted with wind skirts at additional cost. Exact pool measurements, roller attachment points and any intrusions into the water will need to be supplied prior to manufacture.
Blanket Rollers - 20m Pools
Suitable for blankets 20 m long and up to 6.7 m wide.
Blanket Rollers - 25m Pools
Suitable for blankets 25 m long and up to 6.7 m wide.
Blanket Rollers - 50m Pools
Suitable for blankets 50 m long and up to 6.7 m wide.
The enquire cart is like a normal cart system without the payment process. The products you add to the enquire cart and wish to purchase will be sent to the International Quadratics team allowing us to get in contact with you with a price. If you'd like to know more please get in contact.